StandardAsiga
* Affiliate link: We may earn a commission if you purchase through this link – at no extra cost to you. Learn more
* Prices include VAT, plus shipping. We may earn a commission if you purchase through these links – at no extra cost to you. Last updated recently.
No price data available
No reviews yet
Asiga PlasPINK is a premium standard photopolymer resin engineered for precision applications in dental modeling and engineering. This resin stands out for its exceptional detail resolution, allowing for the fabrication of intricate structures with sharp edges and smooth surfaces. Offering a hardness that ensures stable handling without excessive brittleness, PlasPINK is highly versatile. It is ideal for creating casting models in dentistry, highly detailed miniatures, and fine mechanical prototypes. The resin is optimized for a wide range of DLP and LCD printers utilizing wavelengths between 385 nm and 405 nm. Post-processing is straightforward: models can be cleaned in isopropyl alcohol and then fully cured with UV light (approx. 405 nm). Its low viscosity ensures rapid, bubble-free filling of the resin vat. Safety Note: Always wear nitrile gloves and safety glasses when handling, and ensure adequate ventilation, as the resin may cause skin irritation.
Resin TypeDetermines the primary use case and mechanical properties of the cured resin
Standard
WavelengthMust match your printer's UV light — 405nm is most common
385 nm
ViscosityLower = easier to pour and peel. Higher = stronger but harder to work with
350 mPa·s
Cure TimeTime per layer under UV light. Lower = faster prints but may reduce detail
4s
Layer ThicknessThinner layers = more detail but longer print times
25 - 100 µm
Hardness (Shore)Higher number = harder/stiffer part. A-scale for flexible, D-scale for rigid
Shore 83D
ShrinkageHow much the part shrinks after curing. Lower is better for dimensional accuracy
4.5%
DensityWeight per volume — affects the final part weight
1.12 g/cm³
WeightNet weight of the bottle including resin
1000 g
