OtherAsiga
Asiga SuperCAST X-harts är en 3D-utskriftsharts för att skriva ut mastermodeller för gjutning av smycken.
Resin TypeDetermines the primary use case and mechanical properties of the cured resin
Other
Wavelength
affiliate.disclosure affiliate.learnMore
* Priserna inkluderar moms, plus frakt. Senast uppdaterat nyligen. Affiliatelänkar.
Ingen prisdata tillgänglig
Inga recensioner ännu
405 nm
ViscosityLower viscosity = easier to print and clean. High viscosity may need heating
350 mPa·s
Cure TimeTime per layer under UV light. Lower = faster prints but may reduce detail
4s
Layer ThicknessThinner layers = more detail but longer print times
25 - 100 µm
Hardness (Shore)Higher number = harder/stiffer part. A-scale for flexible, D-scale for rigid
Shore 85D
ShrinkageHow much the part shrinks after curing. Lower is better for dimensional accuracy
1.5%
DensitetWeight per volume — affects the final part weight
1.12 g/cm³
SpolviktNettovikt på flaskan inklusive harts
500 g